thien8x Quản Trị Viên
Tên Thật : Hoàng Thiên Giới tính : Tổng số bài gửi : 1121 Điểm : 298494 Join date : 08/11/2009 Age : 34 Đến từ : Hà Nam
| Tiêu đề: WinRAR 4.20 Final (x86/x64) - Trình Nén File Hàng Đầu Thế Giới Thu 14 Jun 2012, 16:11 | |
| | | | | WinRARlà chương trình nén và giải nén mạnh nhất và phổ biến nhất hiện nay. Nó có khả năng nén nhỏ dữ liệu hơn nhiều so với định dạng ZIP thông thường. Bạn có thể dùng nó để nén nhỏ các file để tiện cho việc gửi email, hay truyền tải file qua internet. WinRAR có nhiều chế độ nén thích hợp cho nhiều mục đích khác nhau: như chia nhỏ file nén ra thành nhiều phần, đặt mật khẩu cho file nén, tạo file nén tự bung, … Bạn có thể chọn mức độ nén khác nhau để thu được kích thước nén tối ưu. Các đặc tính của WinRAR:-Sử dụng WinRAR làm bạn nổi trội hơn khi có nhu cầu nén file, nó giúp bạn tạo các file lưu trữ nhỏ hơn so với các đối thủ, tiết kiệm lưu lượng đĩa và chi phí chuyển tải. - WinRAR cung cấp sự hỗ trợ đầy đủ cho các file lưu trữ dạng RAR và ZIP archives và có thể giản nén các file lưu trữ CAB, ARJ, LZH, TAR, GZ, ACE, UUE, BZ2, JAR, ISO, 7Z, Z. - WinRAR có giao diện tương tác đồ họa tận dụng các menu và chuột cũng như giao diện dòng lệnh. - WinRAR dễ sử dụng hơn so với các trình lưu trữ khác với chế độ “wizard” đặc biệt cho phép truy cập nhanh đến các chức năng lưu trữ cơ bản thông qua tiến trình hỏi đáp đơn giản. Điều này tránh sự nhầm lẫn ở các bước sử dụng đầu tiên. - WinRAR cung cấp các lợi ích về sự mã hóa lưu trữ sử dụng AES (Chuẩn mã hóa tiên tiến) với khóa 128 bits. - WinRAR hỗ trợ các file và các lưu trữ có kích cỡ lên đến 8,589 tỉ gigabytes. Số file lưu trữ với các mục đích thực tế không giới hạn. - WinRAR cung cấp khả năng tạo file tự trích xuất và các archives đa đĩa, phục hồi các file ghi và các ổ đĩa cho phép tái tạo ngay cả khi các file lưu trữ bị hư hỏng vật lý. Phiên bản dùng thử 40 ngày, dung lượng 1,18 MB. - Các tính năng của WinRAR được phát triển để làm cho WinRAR là một tiện ích hàng đầu. Changes in 4.20 Final- Spoiler:
1. Changes in RAR compression:
a) RAR general compression algorithm is optimized for better utilization of several processor cores. While some speed gain is possible even in single processor mode, best results are achieved in multi-core environment.
Speed gain depends on data type and average file size. Several cores are utilized more efficiently when compressing large files.
b) we had to increase memory requirements to achieve higher compression speed. General RAR compression algorithm allocates about 120 MB comparing to 40 MB in WinRAR 4.11;
c) RAR text compression algorithm cannot utilize several CPU cores efficiently, so its performance in multiprocessor environment is much lower than for general algorithm. Also its decompression speed is much lower than in general algorithm regardless of CPU number. So we decided to disable the text algorithm by default.
If you need maximum possible compression ratio for plain text data regardless of speed, you can enable the text compression in "Advanced compression parameter" dialog. Press "Compression..." button on "Advanced" page of archiving dialog to access it. You can also change this option permanently in default compression profile;
In the command line mode the text compression can be enabled with -mct switch;
d) "Fastest" (-m1) compression mode also supports several processor cores now. In 4.11 it could use only a single processor core.
2. RAR general decompression algorithm speed is slightly improved, though not to same extent as RAR compression. RAR decompression is not able to use several processor cores, so its performance does not depend on a number of cores.
3. Changes in ZIP compression:
a) now ZIP compression supports several processor cores resulting in noticeably higher performance in multi-core environment. Single CPU ZIP compression is also faster than in 4.11;
b) memory use for ZIP compression is increased to about 15 MB.
4. Recovery volume creating and processing can use several CPU cores resulting in higher speed. Though, typically hard drive seek speed is a limiting factor for recovery volumes, so this gain is most noticeable when working with solid state drive.
5. Now the allowed value for -mt switch is 1 - 32, not 0 - 16 as before.
6. "Find files" command can search data in 7-Zip archives. Previously "Find files" did not support .7z archive format.
7. Windows 2000 is not supported by WinRAR and WinRAR self-extracting modules anymore.
8. "Save current settings" button in "Advanced SFX options" dialog is now available only when converting an existing archive to SFX. Options saved with this button are applied only to convert to SFX operation.
If you create or update SFX archive, only SFX options stored in default compression profile are used. Options saved in "Advanced SFX options" dialog are ignored for these operations.
Homepage : www.rarlab.comDownload : - Trích dẫn :
WinRAR 4.11 Final x86 - ENG
WinRAR 4.11 Final x64 - ENG
Gói ngôn ngữ TV - Trích dẫn :
- Lang Vietnamese x86 / x64
Giải nén và copy file "winrar.lng" vào thư mục cài đặt Keygen - Trích dẫn :
- Keygen WinRAR
Screenshot after Installation! | | | | |
|
|